Water-soluble glazing varnish
Introduction This product has strong adhesion to metals and coatings and has anti-oxidation and anti-corrosion capabilities. Curing makes the surface of the coating transparent, bright, wear-resistant and tough, insoluble in water, and resistant to corrosion. A strong protective film based on acid and alkali, with anti-fingerprint, temperature-proof, moisture-proof, acid-proof, and alkali-proof properties. And can withstand high temperatures. It is the best choice to prevent corrosion and discoloration of the coating surface. It is easy to operate and can be dipped or sprayed. This product has high viscosity and the thickness of the root film layer can be used according to the volume of clean water during operation. The neutral salt spray test can last for several hours without rust. After preparing the working fluid, the working fluid must be fully stirred before use.
1. Characteristics
This product is a water-soluble substance and can be diluted in an appropriate proportion as needed. Non-toxic, non-flammable, and does not pollute the environment. Easy to use.
.The protective film formed after treatment is insoluble in water and has good anti-oxidation, anti-sulfurization and anti-moisture properties. The film layer has good toughness and can be bent and deformed.
.The protective film is highly hard-plated and has good wear resistance and scratch resistance. The moly layer has high gloss and good decorative effect.
2. Scope of application
Suitable for anti-rust and anti-deformation treatment on the surface after metal electroplating, such as copper and copper alloy plating, anti-gold plating, nickel-chromium, silver plating, blue, white, zinc and other plating. It has a good protective effect and is also widely used in decorative coatings and anti-corrosion coatings on hardware, communication equipment, instruments, household appliances, lamps and other products.
3. Usage
It is recommended to use spraying or brushing for rack-plated workpieces or large-area hardware. The volume of this product, the volume of water, and the specific ratio can be adjusted according to the requirements of the film layer.
. Barrel plated parts or small workpieces can be soaked in a volume of clean water, and then dried in a centrifuge for seconds. The surface is slightly wet and non-adhesive. After taking it out, it can be put into the oven for drying.
.Use at room temperature, soak in the solution for about 10 minutes, shake, then dry or dry at room temperature (drying temperature: ℃, time: about 10 minutes). Or spray or brush it and let it dry evenly (it will dry in a few minutes, and any guarantee test can be done after an hour)
. If a small amount of local color is found on the surface after the first sealing, it can be sealed for a second time.
4. Precautions
It is prohibited to use acid and alkali containers to load this product. To avoid affecting the quality,
. Correctly determine the concentration of the soaking solution. If a rainbow appears on the low surface of the product after soaking, it means that the concentration of the solution is too high. Pure water should be added appropriately for dilution. If a high concentration appears after soaking, If the area is rainbow, it means that the concentration of the solution is too low. You should add this product appropriately and soak the product again.
.The drying temperature is ℃ and the time is minutes.
.If the product is found to have brittle lines, it means that the solution concentration is too high or the drying temperature is too high.
.This product should be sealed and stored if not used for a long time.
If you have any questions, please call us.
Degreasing and rust-free operation process workpieces or electroplating, washing and drying
Closed centrifuge drying (or natural drying) cooling packaging
Packing kg/barrel
Please store Store in a cool and ventilated place, away from sources of fire. The validity period is one month from the date of receipt
Statement that the contents and suggestions of this manual are based on the company's experimental data. Since each user has differences in operation and equipment, the company's We do not guarantee the results after using the relevant products, nor are we responsible for any damage caused by adverse results. All information in this manual shall not be used as evidence of copyright infringement
Ready supply 75577 water-soluble varnish | water-soluble coating varnish